RJ4.10A   WATER-BASED EGGSHELL

PRODUCT DATA SHEET

DESCRIPTION:

A high quality water-based, quick drying, acrylic paint.
Artists quality earth and traditional powder pigments provide matchless purity and quality of colour with subtle variations of colour and tone.
It is NOT a permeable paint.

ENVIRONMENTAL CONSIDERATIONS

USAGE/PURPOSE:

FINISH:

Mid-sheen. Subtle colour and tone variation.

COLOURS:

Water-based Egshell is available in all colours.

AVAILABILITY:

FIRE RATING:

Non-Flammable.

HEALTH & SAFETY

NOTE: Those engaged in the use and application of this product should ensure they read this Data sheet.

Sensible Precautions.
Keep out of reach of children.
Protect from frost, extremes of temperature and direct sunlight.
Avoid contact with skin and eyes and inhalation of vapours.
Use in good natural ventilation and wear protective equipment and clothing.
Wear suitable respiratory protection in confined spaces.

TECHNICAL SPECIFICATION:

Composition.
Artists quality powder pigments in an acrylic copolymer dispersion. Solvent: Water.

Performance. Drying: In good drying conditions: Touch dry in 2 hours. Allow 6 hours between coats.

Limitations: Do not apply in temperatures below 5 deg C or in damp or humid conditions.
Only rarely used for the decoration of walls and ceilings. Seek Technical Advice.

Storage. Store upright in secure dry conditions inaccessible to children and animals. Protect from frost and extremes of temperature and away from sources of ignition. Keep out of direct sunlight. Containers should be kept closed during storage. Avoid spillage

PREPARATION:

All surfaces should be sound, dry, clean, and free from dirt, oil, grease or other contamination.
Priming: New woodwork should be primed with an appropriate acrylic Wood Primer.
Existing paint work in sound condition should be washed down with a warm water detergent solution and abraded.
It is recommended that trials are carried out well in advance to ensure that the surface is suitable for application.

APPLICATION:

Stir gently before use. Final coat best applied by brush. First coat(s) can be roller or spray applied.
Two coats normally recommended.

Thinning. Primed or sealed surfaces should require no thinning.
Where necessary, thin with up to 10% clean water by volume.

Coverage.
c. 12 m2/litre/coat on smooth surfaces of low porosity.

Cleaning.
Brushes and equipment should be cleaned with warm soapy water immediately after use.